ACHIEVE WG HERBICIDE — label 03
Original approved APVMA PDF
Page 1
For Official Use Only
e-Label Application (DRAFT)
RLP
Company Name: CROP CARE AUSTRALASIA PTY LTD
APPROVED
Product Name: ACHIEVE WG HERBICIDE
eLabel Application No: DCNV-17888369E77
APVMA Approval No: 46159/104094
Product ID: 46159 Version No: 2.0
Application Started: 2015-Sep-23 16:27:28 Version Created: 2015-Oct-16 14:39:51
Started By: Bronwyn Vorpagel Printed: 2015-Oct-16 14:57:34
Label Name: ACHIEVE WG HERBICIDE
Signal Headings: CAUTION
KEEP OUT OF REACH OF CHILDREN
READ SAFETY DIRECTIONS BEFORE OPENING OR USING
Constituent 400 g/kg TRALKOXYDIM
Statements:
Mode of Action:
GROUP A HERBICIDE
Statement of For the control of wild oats and annual ryegrass and suppression of annual phalaris in
Claims: wheat, barley, rye and triticale.
Net Contents: 50kg
10kg
5kg
Restraints: DO NOT apply to weeds or crops under stress due to severe frost, drought, water logging,
low soil fertility, pre-emergent herbicides, insects or diseases.
DO NOT use boomless jets or misters.
DO NOT apply if rain is expected within a half-hour.
Directions for Use: This section contains file attachment.
File Name: Directions for Use Table 23-09-15.pdf
File Size: 23143 bytes
Other Limitations:
Page 1 of 3Page 2
For Official Use Only
Withholidng DO NOT GRAZE OR CUT FOR STOCK FOOD FOR 14 DAYS AFTER APPLICATION.
Periods:
Trade Advice:
General This section contains file attachment.
Instructions: File Name: General Instructions 23-09-15.pdf
File Size: 31984 bytes
Resistance Resistant Weeds Warning
Warning: Achieve WG Herbicide is a member of the cyclohexanediones group of herbicides.
Achieve has the inhibitors of acetyl coA carboxylase mode of action. For weed resistance
management Achieve is a Group A herbicide. Some naturally occurring weed biotypes
resistant to Achieve and other inhibitors of acetyl coA carboxylase herbicides may exist
through normal genetic variability in any weed population. The resistant individuals
can eventually dominate the weed population if these herbicides are used repeatedly.
These resistant weeds will not be controlled by Achieve or other inhibitors of acetyl coA
carboxylase herbicides. Since the occurrence of resistant weeds is difficult to detect prior to
use, Crop Care Australasia Pty Ltd accepts no liability for any losses that may result from
the failure of Achieve to control resistant weeds.
Precautions:
Protections: PROTECTION OF CROPS, NATIVE AND OTHER NON-TARGET PLANTS
DO NOT apply under weather conditions or from spraying equipment which may cause
spray to drift onto nearby susceptible plants/crops, cropping lands or pastures.
PROTECTION OF LIVESTOCK, WILDLIFE, FISH, CRUSTACEANS AND ENVIRONMENT
Moderately hazardous to fish. DO NOT contaminate streams, rivers or waterways with the
chemical or used container.
Storage and STORAGE AND DISPOSAL (5 and 10kg)
Disposal: Store in the closed, original container in a dry, cool, well ventilated area out of direct
sunlight.
Single rinse or shake remainder into spray tank. Do not dispose of undiluted chemicals on
site. Puncture and deliver empty packaging to an approved waste management facility. If
an approved waste management facility is not available, bury the empty packaging 500mm
below the surface in a disposal pit specifically marked and set up for this purpose clear of
waterways, desirable vegetation and tree roots, in compliance with relevant local, state or
territory government regulations. Do not burn empty containers or product.
STORAGE AND DISPOSAL (50 kg)
Store in the closed, original container in a cool, well ventilated area. Do not store for
prolonged periods in direct sunlight.
Triple rinse containers before disposal. Add rinsings to spray tank. Do not dispose of
undiluted chemicals on site. If recycling, replace cap and return clean containers to recycler
or designated collection point. If not recycling, break, crush or puncture and deliver empty
packaging to an approved waste management facility. If an approved waste management
facility is not available, bury the empty packaging 500mm below the surface in a disposal
pit specifically marked and set up for this purpose clear of waterways, desirable vegetation
Page 2 of 3Page 3
For Official Use Only
and tree roots, in compliance with relevant local, state or territory government regulations.
Do not burn empty containers or product.
Safety Directions: Harmful if swallowed. Will irritate the eyes. If product in eyes, wash it out immediately with
water. When preparing spray wear face shield or goggles. Wash hands after use. After
each day’s use, wash face shield or goggles.
First Aid If poisoning occurs contact a doctor or Poisons Information Centre. Phone Australia 131
Instructions: 126.
First Aid Warnings:
Page 3 of 3Page 4
Achieve WG Herbicide [46159] Version: 23-09-15 Page | 1 of 2
__________________________________________________________________________________________
DIRECTIONS FOR USE
Crop Weeds Weed State Rate/ha Critical Comments
Controlled Stage
Wheat Wild oats Growing Qld, 300 g Apply in first 4-6 weeks to unstressed crops and
Barley actively at NSW, Vic, * weeds when the majority of crop plants have 2
Rye 2-4 leaf Tas, leaves. Application to lush crops may increase
Triticale (pre-tillering) SA only likelihood of yellowing and/or growth retardation.
380 g Apply in the first 4-6 weeks to unstressed crops and
* weeds when the majority of crop plants have 3
leaves. This is the minimum rate if tank mixing with
listed broadleaf herbicides.
430 g Apply in first 4-6 weeks when the majority of crop
* plants have 3 leaves. Use this rate under dry soil
conditions or if applying during August onwards.
®
Use of Supercharge at 1L per 100L may improve
weed control under these conditions.
Growing 500 g Use where application is delayed. Do not apply to
actively up to * pre-tillered crops. Use of Supercharge at 1L per
early tillering 100L may improve weed control is soil if dry or if
(Maximum of applying during August onwards.
2 tillers)
Wild oats Growing NSW, Vic, 380 g Use when wild oats predominate. Do not apply to
actively at Tas., SA * crops with less than 3 leaves. Use of Supercharge
and 2-4 leaf only at 1L per 100L may improve weed control if soil is
(pre-tillering) dry or if applying during August onwards.
Annual Growing 500 g Do not apply to pre-tillered crops. Use of
ryegrass in actively up to * Supercharge at 1L per 100L may improve weed
mixed early tillering control if soil is dry or if applying during August
infestations (Maximum of onwards.
2 tillers)
Growing 380 Do not apply to tillered ryegrass. Using spray
actively at - 500 g volumes of 70-100 L/ha may assist control. Tank
2-4 leaf * mixes of the lower rate with listed broadleaved
(pre-tillering) herbicides may reduce ryegrass control.
Annual Growing 380 Preferably apply within 6 weeks of sowing when
phalaris actively at - 500 g weeds are at the 2 to 4 leaf stage and growing
(suppression 2-4 leaf * actively. Do not apply to tillered annual phalaris.
only of (pre-tillering) The higher rate may give more reliable results. Use
Paradoxa of spray volumes of 70-100 L/ha may assist control.
grass, Tank mixes with listed broadleaved herbicides may
Lesser canary reduce annual phalaris control. Paradoxa grass is
grass) more sensitive than lesser canary grass. Do not
apply to crops with less than 3 leaves.
Wheat Wild oats Growing WA only 250g Apply in first 4-6 weeks to unstressed crops and
Barley actively at * weeds when the majority of crop plants are at
(except 2-4 leaf growth stage Z12. Application to lush crops may
Moondyne (pre-tillering) increase likelihood of yellowing and/or growth
retardation.
Yagan) Growing 380 g Use where application is delayed and the majority
Rye actively up to * of crop plants are at growth stage Z13. This is the
Triticale early tillering preferred rate for dense wild oat populations. Use
(Maximum of this rate if tank mixing with listed broadleaf
2 tillers) herbicides.
Wild oats Growing 380 g Use when wild oats predominate. Apply when the
actively up to * majority of crop plants are at growth stage Z13.
and early tillering
(Maximum of
2 tillers)
Annual Growing Do not apply to tillered ryegrass. Use of higher
ryegrass in actively at spray volumes may assist control. Tank mixes with
mixed 2-4 leaf listed broadleaved herbicides may reduce ryegrass
infestations (pre-tillering) control.Page 5
Achieve WG Herbicide [46159] Version: 23-09-15 Page | 2 of 2
__________________________________________________________________________________________
*ALWAYS ADD SUPERCHARGE. THE NORMAL RATE IS 750 mL PER 100L SPRAY SOLUTION.
INCREASE THE RATE TO 1L PER 100L UNDER DRYING CONDITIONS. ALWAYS USE 1L PER
100L FOR AERIAL APPLICATION.
NOT TO BE USED FOR ANY PURPOSE, OR IN ANY MANNER, CONTRARY TO THIS LABEL
UNLESS AUTHORISED UNDER APPROPRIATE LEGISLATION.
Achieve Version: 23-09-15 Page 2 of 2
Page 6
Achieve WG Herbicide [46159] Version: 23-09-15 Page | 1 of 2
__________________________________________________________________________________________
GENERAL INSTRUCTIONS
Mixing
Only use sprayers in good working condition with high capacity agitation. Ensure the sprayer is
cleaned according to the label instructions on the product used prior to Achieve WG. Use only clean
water for the spray solution. Ensure that all in-line strainer and nozzle screens in the sprayer are 100
mesh or coarser. Do NOT use cartridge or disc filters after the spray tank outlet, or have two (or more)
filters directly after each other anywhere in the system.
Begin to fill spray tank with clean water, and engage agitator. Agitation must be continued throughout
the entire mixing and spraying procedure.
When the sprayer is half full of water, add Achieve WG slowly to the spray tank through the tank
opening or through a hopper designed to handle granules. The hopper should be dry before adding
Achieve WG granules.
Do not premix Achieve WG.
Add the total required amount of Achieve WG from all cartons first, prior to adding other herbicides
or Supercharge adjuvant.
Wait at least one minute after the last of the Achieve WG has been added to the tank to allow for
complete dispersion of the granules.
Add the recommended broadleaf weed herbicide or insecticide next if tank mixing.
Slowly add Supercharge to the tank last, in at least 10 times its volume of water especially where
a suction (filling) probe or hopper is used.
Continue to fill tank to desired level with water.
Spraying instructions
Ground equipment
Apply in a spray volume of 50-150 litres of water per hectare at a pressure of 250 - 350 kPa to ensure
proper dispersion and spraying characteristics of the Achieve WG spray mix.
Use flat fan nozzles such as Spraying Systems 110-01, 110-015, 110-02 or equivalent sizes from
other manufacturers. Do not use 110-03 or bigger nozzles with Achieve. Do not use floodjet nozzles,
boomless jets or misters or controlled droplet application equipment. Nozzles may be angled forward
o
45 to enhance penetration of the crop and provide better coverage.
Always ensure that agitation is continued until spraying is completed even if stopped for brief periods
of time. If the agitation is stopped for more than 5 minutes re-suspend the spray solution by running
on full agitation until the settled particles are fully re-suspended, prior to spraying. The spray mixtures
of Achieve WG and Supercharge may be left overnight without loss of efficacy provided the settled
product is completely re-suspended by stirring and/or agitation prior to re-use.
Aerial equipment
Apply through boom or Micronair units in 20-30 litres of water per hectare. The use of the higher
volume is preferred due to more reliable results. Droplet size should be 200-250 microns (VMD) and
swath width should not be wider than recommended for type of plane and application unit. Weed
control following aerial application may not be as good as from ground application.
Crop Safety
If Achieve WG is applied to stressed crops or treatment is followed by stress or if crop plants have less
than 2 true leaves (Z12), yellowing or growth retardation may occur. Crops normally recover without
loss in yield. Avoid double spraying (overlap).
PLANTBACK PERIODS: Do not plant sorghum, maize or rice for a period of four weeks after
application of Achieve WG. Allow at least 10 days between application of Achieve WG and any other
herbicide, except Ally for which the interval should be 14 days after Achieve WG. Allow at least 10
days between application of Achieve WG and any fertilizer treatment.Page 7
Achieve WG Herbicide [46159] Version: 23-09-15 Page | 2 of 2
__________________________________________________________________________________________
Compatibility
For broadleaved weed control, Achieve WG may be mixed as below.
State Achieve WG g/ha Co-herbicide maximum L/ha
Qld, NSW, 380-500g Quattro ®, Buctril ® MA 1.0-1.4
Vic, SA 380-500g Polo ®, MCPA ester 0.5/1.0
only 380-500g Tigrex ® 0.8
(mixture may cause temporary chlorosis)
380-500g Lontrel ® 0.3
380-500g Eclipse ® 7g
WA only 380 g Quattro ®, Buctril ® MA 1.0
*
380 g Polo ®, MCPA ester 0.5
*
Note restriction on Kulin.
380 g Tigrex ® (mixture may cause temporary chlorosis) 0.8
380 g Lontrel ® 0.3
380 g Eclipse ® 7g
DO NOT mix Achieve WG with 2,4-D, MCPA amine, dicamba or Ally (metsulfuron-methyl). Allow at
least 10 days between application of Achieve WG and herbicides containing 2,4-D, MCPA amine,
dicamba or similar actives. Allow at least 14 days between application of Achieve WG and Ally
(metsulfuron-methyl). Achieve WG should be applied prior to the broadleaved herbicides.
Insecticides
Achieve WG is compatible with Axe, Mascot Duo, Imidan, Matador Zeon and Saboteur.